36mm 12V 24V BLDC Planetary Geared Motor Model NFP-36GP-BL3525

High Torque Brushless Planetary Gear Motor Data Sheet ☑️All-metal gear  ☑️Ball bearing  ☑️ Built-in Hall driver The 3525 series planetary BLDC motor outputs 6 signals per revolution. Motor Model NFP-36GP-BL3525 Rotation CW & CCW Rated Voltage 12V / 24V DC No Load Speed 5rpm – 1,050rpm No Load Current 0.12A / 0.16A Max Torque 50kg.cm Output Power 2W / 8W Output Shaft Diameter 8mm Output Shaft Length 20mm Wiring Length 280mm Weight 240g – 350g   Model: NFP-36GP-BL3525, 12V DC,  Max 2W Ratio Gearbox Length No-load Current No-load Speed Rated Current Rated Speed Rated Torque Stall Current Reduction Stages 5.2:1 26.5mm ≤0.12A 525rpm ≤0.25A 400rpm 0.35kg.cm ≤0.5A 1 stage 19:1 34.5mm ≤0.12A 145rpm ≤0.25A 110rpm 1.2kg.cm ≤0.5A 2 stages 27:1 34.5mm ≤0.12A 100rpm ≤0.25A 75rpm 1.7kg.cm ≤0.5A 2 stages 51:1 42.5mm ≤0.12A 55rpm ≤0.25A 40rpm 3.2kg.cm ≤0.5A 3 stages 100:1 42.5mm ≤0.12A 27rpm ≤0.25A 20rpm 6.5kg.cm ≤0.5A 3 stages 139:1 42.5mm ≤0.12A 20rpm ≤0.25A 15rpm 9.0kg.cm ≤0.5A 3 stages 264:1 50.5mm ≤0.12A 10rpm ≤0.25A 8rpm 17.0kg.cm ≤0.5A 2 stages 515:1 50.5mm ≤0.12A 5rpm ≤0.25A 4rpm 25.0kg.cm ≤0.5A 2 stages Note: all reduced no-load speeds have a tolerance of ±15%.   Model: NFP-36GP-BL3525, 24V DC,  Max 8W Ratio Gearbox Length No-load Current No-load Speed Rated Current Rated Speed Rated Torque Stall Current Reduction Stages 5.2:1 26.5mm ≤0.16A 1,050rpm ≤0.4A 805rpm 0.7kg.cm ≤1.0A 1 stage 19:1 34.5mm ≤0.16A 290rpm ≤0.4A 220rpm 2.5kg.cm ≤1.0A 2 stages 27:1 34.5mm ≤0.16A 200rpm ≤0.4A 155rpm 3.5kg.cm ≤1.0A 2 stages 51:1 42.5mm ≤0.16A 110rpm ≤0.4A 82rpm 6.5kg.cm ≤1.0A 3 stages 100:1 42.5mm ≤0.16A 55rpm ≤0.4A 42rpm 13.0kg.cm ≤1.0A 3 stages 139:1 42.5mm ≤0.16A 40rpm ≤0.4A 30rpm 18.0kg.cm ≤1.0A 3 stages 264:1 50.5mm ≤0.16A 21rpm ≤0.4A 16rpm 34.0kg.cm ≤1.0A 2 stages 515:1 50.5mm ≤0.16A 10.5rpm ≤0.4A 8rpm 50.0kg.cm ≤1.0A 2 stages Note: all reduced no-load speeds have a tolerance of ±15%.   24V 12V High Efficiency BLDC Motors Outline Drawing This 3525 Brushless gear motor supports forward and reverse rotation, but due to the sensitivity of the current by the built-in driver board chip, it is advised to avoid making sudden adjustments when changing direction. To ensure a long service life, please follow these two methods for adjustment: 1. When switching direction is necessary, first cut off the power supply, wait for approximately 2 to 3 seconds, and then reconnect the power to switch the direction. 2. Reduce the speed to a lower level using PWM speed control before switching direction through the white wire connection. Powerful 36mm Brushless Gear Motor Wiring Instruction Black wire: Negative pole of motor power supply -, can not be wrongly connected. Red wire: Positive pole of motor power supply , can not be wrongly connected. White wire: CW/CCW forward and reverse control. Blue wire: PWM speed regulation control, connected to 0-5V pulse width speed regulator. Yellow wire: FG signal line outputs Hall signal, basic pulse with 9 signals per revolution. Red wire is connected to positive pole and black wire is connected to negative pole, motor rotates. When white and black wires are connected in parallel to negative pole (to change the original direction). Note: Brushless motors have strict wiring requirements and should not be wired incorrectly, as incorrect wiring can burn out the built-in driver board, leading to product damage. Compact Brushless Planetary 36mm Gearmotor Bracket Dimension Small and lightweight 36mm planetary drive motor, featuring a reliable 3525 brushless motor for enhanced power, with 7mm D-shaft made from high quality material, ensuring long-lasting strength, can easily be mounted using our 22mm face mounts. Keywords: high quality brushless planetary gearbox motor, BLDC motors, planetary dc gear motor, planetary gear motor, small gearmotors, 12v dc planetary gear motor, dc brush gear motor